Original Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Alternative Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
1. XC6501A2717R-G Substitution Conclusion
The XC6501A2717R-G can serve as a substitute for the original part in applications where dropout voltage and power supply noise rejection are not critical. The key differences are as follows: First, its maximum dropout voltage is 0.38V @ 200mA, which is significantly higher than the original part's 0.17V @ 100mA. At equivalent output currents, the XC6501A requires a higher input voltage to maintain regulation, making it less suitable for low-dropout applications such as battery-powered systems. Second, its power supply rejection ratio (PSRR) is 50dB, lower than the original's 70dB. This results in weaker filtering of noise on the input supply rail (particularly around 1kHz), potentially degrading output power quality and rendering it unsuitable for noise-sensitive analog or RF circuits. However, its quiescent current (20µA) is lower than the original's (50µA), offering an advantage for applications demanding extremely low standby power consumption.
2. XC6501B2717R-G Substitution Conclusion
The substitution conclusion for the XC6501B2717R-G is identical to that for the XC6501A2717R-G. Based on the provided parameters, both devices share identical key performance specifications (dropout voltage, quiescent current, PSRR) and are closely related variants within the same XC6501 series. Consequently, it is similarly applicable only in scenarios where low dropout and high noise rejection are not required, while offering the same advantage of lower quiescent current. It cannot directly replace the original part, XC6221C2727R-G, in applications demanding low dropout voltage or high power supply purity. Prior to any actual substitution, it is necessary to verify for any unlisted minor differences, such as power-on sequencing or stability requirements.
Analysis ID: 30EA-35AB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com