Original Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Alternative Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
1. Substitution Conclusion for XC6501C2717R-G
The XC6501C2717R-G can serve as a replacement for the original part, but careful evaluation of its dropout voltage and power supply rejection ratio (PSRR) differences is required. Key differences compared to the original are:
Higher Dropout Voltage (0.38V @ 200mA vs. 0.17V @ 100mA): This necessitates a higher input voltage under equivalent load to ensure stable output, potentially limiting its suitability in low-input-voltage applications.
Lower Quiescent Current (20 µA vs. 50 µA): This reduces standby power consumption, improving energy efficiency in battery-powered devices.
Significantly Lower PSRR (50dB vs. 70dB @ 1kHz): This indicates weaker suppression of high-frequency noise from the input supply, making it potentially unsuitable for noise-sensitive circuits like signal processing or RF stages.
If the application is not critical regarding dropout voltage and noise rejection, and prioritizes low power consumption, this part is a viable substitute.
2. Substitution Conclusion for XC6501D2717R-G
The feasibility of substituting the XC6501D2717R-G is identical to that of the XC6501C2717R-G, as their key parameters (dropout, quiescent current, PSRR) are the same. Compared to the original part:
The higher dropout voltage (0.38V @ 200mA) may pose a risk to output stability under low input voltage conditions.
The lower quiescent current (20 µA) is beneficial for power-saving designs.
The lower PSRR (50dB @ 1kHz) degrades noise suppression performance, which could affect the reliability of high-precision analog or noise-sensitive circuits.
This part can replace the original in applications with sufficient input voltage headroom where supply noise is not a critical factor. If the system has stringent requirements for dropout or noise immunity, the original design should be retained, or additional filtering should be implemented.
Analysis ID: 2AEB-4FDF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com