Original Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Alternative Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
1. XC6217C25A7R-G Substitution Conclusion
Based on a comparison of key parameters, the XC6217C25A7R-G can serve as a replacement for the original XC6501B25A7R-G, though the performance differences must be considered. The substitute’s quiescent current (Iq) is reduced from 19 µA to 8 µA, which helps lower standby power consumption. Its PSRR is improved from 50 dB to 70 dB, significantly enhancing power supply noise rejection and making it more suitable for noise-sensitive applications. The dropout voltage is specified as 0.17 V @ 100 mA, compared to 0.38 V @ 200 mA for the original part. While the numerical value is lower, the test condition differs (load current halved); the actual dropout at a full 200 mA load may be higher. It is therefore necessary to verify whether the substitute meets the system’s minimum input voltage requirement. The package and control functions are identical. Provided the system has sufficient dropout margin, the replacement can achieve lower power consumption and superior noise performance.
2. XC6217D25A7R-G Substitution Conclusion
The XC6217D25A7R-G shares identical parameters with the XC6217C25A7R-G, so its substitution feasibility follows the same conclusion as above: the improvements in quiescent current and PSRR benefit low-power and high-noise-rejection applications, but the difference in dropout test conditions may affect full-load performance evaluation. There is no distinction between the two in the specified parameters. It is possible that the D version reflects an internal production batch or a specific suffix variation (e.g., temperature characteristics or screening grade). It is advisable to consult the manufacturer’s detailed documentation to confirm whether any unlisted differences exist, such as in accuracy or stability. Based solely on the given parameters, the D version can directly replace the original part and deliver the same performance improvements, subject to the same verification of actual full-load dropout voltage against circuit requirements.
Analysis ID: C2A8-60EC000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com