Original Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Alternative Part
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
Linear Voltage Regulator IC Positive Fixed 1 Output 200mA 4-USPN (0.90x1.2)
1. XC6221A25A7R-G Substitution Conclusion
The XC6221A25A7R-G is fully compatible with the original XC6501C25A7R-G in basic electrical parameters—input voltage, output voltage, current capability, package, and enable control—and can serve as a direct replacement. However, three key differences must be noted: the quiescent current (Iq) increases from 19 µA to 50 µA, which significantly raises power consumption in standby or battery‑powered applications and may reduce operating time; the dropout voltage drops to 0.17 V at 100 mA load (compared to 0.38 V at 200 mA for the original), indicating better regulation under low input‑voltage conditions and making it more suitable for low‑dropout applications; and the power‑supply rejection ratio (PSRR) improves from 50 dB to 70 dB at 1 kHz, reflecting substantially enhanced rejection of supply ripple and noise, which benefits noise‑sensitive analog or RF circuits. If the application is sensitive to quiescent current, careful evaluation is advised; otherwise, the improved dropout and PSRR characteristics can enhance system performance.
2. XC6221B25A7R-G Substitution Conclusion
The XC6221B25A7R-G shares identical specifications with the XC6221A25A7R-G; therefore, the substitution conclusion is the same: it is electrically compatible and can directly replace the original device, with the same trade‑offs of higher quiescent current (50 µA vs. 19 µA), lower dropout voltage (0.17 V at 100 mA), and improved PSRR (70 dB vs. 50 dB). After substitution, the system will benefit from better low‑dropout performance and noise rejection, but will incur roughly 2.6× higher quiescent‑current loss, which may affect battery life in low‑power designs. Unless otherwise noted, the “A” and “B” suffixes typically denote internal production lots or minor revisions, and the devices are considered functionally equivalent in practice; nevertheless, bench verification in the target circuit is recommended to ensure stability.
Analysis ID: C3C0-490C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com