Original Part
Alternative Part
1. ICL7621DCBAZ Substitution Conclusion
Direct substitution is not recommended. Although the two devices share a compatible fundamental architecture (CMOS, dual-channel, supply voltage range) and package, their core performance differs significantly. The Renesas part exhibits a slew rate (0.16 V/µs) only one-tenth that of the original (1.6 V/µs), and its gain-bandwidth product (480 kHz) is substantially lower than the original’s 1.4 MHz. This device has limited capability for processing fast or higher-frequency signals, which may lead to output waveform distortion or insufficient bandwidth. Furthermore, its output type is not explicitly specified as rail-to-rail; if it does not actually support rail-to-rail operation, the output dynamic range will be severely restricted in low-voltage single-supply applications. The sole advantage is its much lower quiescent current (100 µA per channel) compared to the original (1 mA per channel), making it suitable for ultra-low-power scenarios. Substitution should only be considered with caution in circuits where speed, bandwidth, and output swing requirements are extremely low and power consumption is the top priority.
2. ICL7621DCBAZ-T Substitution Conclusion
Identical to the ICL7621DCBAZ, direct substitution is not recommended. The “-T” suffix typically denotes only a tape-and-reel packaging difference; the electrical parameters are exactly the same as those of the ICL7621DCBAZ. The same performance degradations in slew rate and gain-bandwidth product, as well as the ambiguity in output type, remain. Consequently, this device cannot meet the original design specifications in circuits with demanding dynamic performance requirements, potentially leading to functional failure in signal conditioning, high-speed sampling, or full-swing output applications. It is suitable only for static or low-frequency, power-sensitive applications that do not rely on rail-to-rail output. Prior to substitution, the output characteristics must be verified through bench testing to ensure system compatibility.
Analysis ID: 9DCC-FFC8000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com