Original Part
Alternative Part
1. LM2902EDR2G Substitution Conclusion
Direct substitution is not recommended. Although the package is compatible, the LM2902EDR2G exhibits significant differences in key electrical parameters. Its operating voltage range (3V to 32V) is substantially lower than the LM248DT's 44V single-supply rating, rendering it unsuitable for the original high-voltage supply environment. Its input bias current (90nA) is three times that of the original part (30nA), which will introduce greater input error current in high-impedance applications, degrading DC accuracy. Furthermore, while its slew rate (SR) is unspecified, this part typically features an SR lower than the original's 0.5V/µs. This may result in insufficient response to fast-changing signals, potentially causing distortion in large-signal applications. It is only suitable for applications where requirements for supply voltage, precision, and speed are significantly relaxed.
2. AS324MTR-G1 Substitution Conclusion
Substitution can be considered for non-high-voltage applications, but dynamic performance must be evaluated. The differences are as follows: its maximum supply voltage (36V) remains below the LM248DT's 44V, making it unsuitable for the original high-voltage supply rail. Its input bias current (20nA) is superior to the original part, which can improve DC accuracy. However, the key dynamic parameter, slew rate (SR), is unspecified. The typical SR for the general-purpose AS324 series is usually far below 0.5V/µs, which constitutes the primary risk of substitution. The circuit's ability to handle fast signals or full-scale swings would be severely degraded, potentially leading to waveform distortion or increased settling time. If the original circuit operates at a lower voltage and has no stringent signal speed requirements, this part offers advantages in static power consumption and input error. Otherwise, it is not recommended.
Analysis ID: ECE1-FFBA000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com