Original Part
Shunt Voltage Reference IC Adjustable 2.5V 36 VV ±0.25% 100 mA TO-92-3
Alternative Part
1. TL431ILPRPG Substitution Conclusion
The TL431ILPRPG demonstrates low feasibility as a direct replacement for the original TL1431ACZ-AP, primarily due to its significantly wider initial tolerance (±2.2%) compared to the original’s ±0.25%. In applications requiring a high-precision voltage reference, the output voltage deviation of the TL431ILPRPG may be excessive, leading to degraded system performance. Although its typical temperature coefficient (50 ppm/°C) is better than the original’s 90 ppm/°C, offering improved temperature stability, the large tolerance gap generally cannot be compensated by temperature performance alone. Additionally, the cathode current requirement increases from 600 µA to 1 mA; under the same biasing conditions, the TL431ILPRPG may draw higher quiescent current, which could impact low-power designs. While the package is compatible (TO-92-3), given the significant differences in accuracy and power consumption, this substitute is only suitable for circuits with relaxed tolerance requirements (e.g., ≥±2%) or non-critical applications. It is not recommended for direct substitution in high-precision designs.
2. TL1431CLPRE3 Substitution Conclusion
The TL1431CLPRE3 shows relatively high feasibility as a replacement for the original TL1431ACZ-AP, though careful evaluation of application details is advised. Key differences include an initial tolerance of ±0.4%, which is slightly wider than the original’s ±0.25%, resulting in somewhat reduced output voltage accuracy; however, this may still be acceptable in many general-purpose reference circuits. The temperature coefficient is unspecified, whereas the original is rated at 90 ppm/°C, introducing uncertainty in temperature performance that could affect stability in high-temperature or wide-temperature-range environments. Furthermore, the cathode current requirement increases from 600 µA to 1 mA, raising the required bias current; this may necessitate adjustment of external resistors to maintain the proper operating point. Package compatibility is maintained (TO-92-3), and core parameters such as reference voltage (2.5 V), maximum voltage (36 V), and output current (100 mA) remain unchanged. In applications where precision is not extremely critical and the slight increase in cathode current is tolerable, the TL1431CLPRE3 can serve as a viable substitute. Nevertheless, validation in the actual circuit is recommended to ensure temperature drift remains within acceptable limits.
Analysis ID: C383-5181000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com