Original Part
Alternative Part
1. TLV431BIDBVR Substitution Conclusion
The TLV431BIDBVR can serve as a viable substitute for the TS431ILT, though key differences must be considered. Its output current is 15 mA—only half of the original part’s 30 mA—making it unsuitable if higher load or shunt current capability is required. The tolerance of ±0.5% is tighter than the original’s ±2%, offering improved accuracy. The cathode operating current of 100 µA is higher than the original’s 60 µA; in lower impedance circuits, ensure the minimum cathode current is met. The package is the same SOT-23-5 with pin compatibility, but the temperature coefficient is not specified. Verify stability over the intended operating temperature range meets system requirements. If circuit current demand is ≤15 mA and the supply can support the higher cathode current, substitution will enhance accuracy; otherwise, reassess load conditions.
2. TLV431ACDBVT Substitution Conclusion
The TLV431ACDBVT is a potential substitute for the TS431ILT, with similar limitations. Its output current of 15 mA is lower than the original’s 30 mA, so verify load current compatibility. Tolerance is ±1%, better than the original’s ±2%, providing moderate accuracy improvement. The cathode current of 80 µA is slightly higher than the original’s 60 µA, imposing somewhat higher bias current requirements, though typically not critical. Package and pinout are compatible, but the temperature coefficient is unspecified; exercise caution in wide-temperature applications. If the application operates within 15 mA and has moderate accuracy needs, this device can substitute and improve performance. For high-load or low-drift scenarios, further testing is recommended.
Analysis ID: 4D05-2710000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com