Original Part
Alternative Part
1. 24LC64-E/MS Substitution Conclusion
The 24LC64-E/MS can functionally substitute the original part, provided the system supply voltage never drops below 2.5V and the PCB pad design is compatible. The key differences lie in the operating voltage range (Microchip: 2.5V-5.5V vs. Rohm: 1.6V-5.5V) and the package body width (Microchip: 3.00mm vs. Rohm: 2.80mm). If the original system was designed to operate within the low-voltage range of 1.6V to 2.5V, the 24LC64-E/MS will fail to function correctly. The minor difference in package width poses a potential solder joint reliability risk for a direct drop-in replacement. It is necessary to verify PCB layout compatibility or implement minor adjustments.
2. 24LC64F-I/MS Substitution Conclusion
The feasibility of substitution for the 24LC64F-I/MS is identical to the conclusion for the 24LC64-E/MS; it can serve as a functional replacement under the same conditions of voltage and package compatibility. The core specifications of the 24LC64F-I/MS and the 24LC64-E/MS are exactly the same. The primary differences similarly manifest as a narrower operating voltage range (lacking support for 1.6V-2.5V) and a slightly wider package (3.00mm vs. 2.80mm). Since the performance deltas between these two parts and the original component are identical, the substitution considerations are also the same: it is mandatory to ensure the system's minimum voltage remains above 2.5V and to verify the PCB pad's ability to accommodate the slightly wider package.
Analysis ID: A1EE-F106000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com