Alternative Part
1. TL431BVLPRAG Substitution Conclusion
This component is a suitable substitute and represents a performance upgrade. The TL431BVLPRAG, like the original LM431ACZX, is an adjustable shunt voltage reference from onsemi in a TO-92 package, with fully compatible key electrical parameters (maximum voltage, output current). The primary difference lies in its reference voltage of 2.495V (a 5mV inherent deviation from the original 2.5V, which should be considered in feedback networks). However, its accuracy is improved to ±0.4% (superior to the original’s ±2%), providing a more precise and consistent reference voltage in the same application, thereby enhancing overall system performance. Other critical parameters, such as cathode operating current (1mA) and typical temperature drift (50ppm/°C), remain identical, allowing direct substitution with higher accuracy.
2. TL431ACLPRE3 Substitution Conclusion
This part is generally substitutable in most applications, but attention should be paid to key parameter differences. The TL431ACLPRE3 is the corresponding part from Texas Instruments (TI), sharing the same package and basic functionality (2.495V adjustable reference). Two core distinctions exist: first, its initial accuracy is ±1%, which is better than the original (±2%) but not as high as the TL431BVLPRAG; second, its typical cathode operating current is reduced to 600µA (compared to 1mA for the original part). This lower minimum current required for device startup and reference voltage maintenance benefits low-power designs. However, in existing circuits that rely on a specific operating current to optimize dynamic performance or noise, the operating point may need re-evaluation. If the circuit is insensitive to the minimum operating current, this part can serve as a qualified substitute.
Analysis ID: 9B23-7C02000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com