Alternative Part
1. TL072CDT Substitution Conclusion
The TL072CDT offers package compatibility (both in 8-SOIC) and a supply voltage range (6V–36V) that can cover the requirements of the LM1458MX. However, its core difference lies in the J‑FET input stage, which results in a significantly lower input bias current (20 pA) compared to the original’s 80 nA. This makes it suitable for applications sensitive to input current, such as high‑impedance sensor signals. Additionally, its slew rate (16 V/µs) is notably higher, supporting faster transient response and making it appropriate for audio or high‑speed signal processing. Its input offset voltage is slightly higher (3 mV vs. 2 mV), which may require adjustment in applications demanding strict DC accuracy. Furthermore, if the original circuit relies on bipolar input characteristics (e.g., bias‑current paths), stability should be re‑evaluated. Overall, for applications prioritizing high speed, low input current, and not requiring precision DC amplification, the TL072CDT is a viable substitute, with the added advantage of automotive‑grade (AEC‑Q100) reliability.
2. BA4560F-E2 Substitution Conclusion
Although the BA4560F-E2 is also a general‑purpose dual op‑amp, there is a mechanical difference in package dimensions (8‑SOP width 4.40 mm vs. the original 8‑SOIC width 3.90 mm), requiring verification of PCB layout compatibility. Its supply range (8V–30V) has a lower upper limit than the LM1458MX’s 36 V; if the original design operates above 30 V, direct substitution is not feasible. Performance‑wise, the BA4560F-E2 offers a higher slew rate (4 V/µs) and gain‑bandwidth product (10 MHz) compared to the original part, and its input offset voltage (500 µV) is significantly lower, which benefits DC accuracy. Its input bias current (50 nA) is also smaller, reducing impact on high‑impedance circuits. In summary, provided the supply voltage remains within 30 V and the package change can be accommodated, the BA4560F-E2 can replace or even improve upon the original performance in terms of bandwidth, accuracy, and speed, but supply and layout compatibility must be verified.
Analysis ID: 4366-9C16000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com