Alternative Part
1. LF347BD Substitution Conclusion
The LF347BD serves as a viable substitute for the LF347M, though attention must be paid to key performance parameter differences. The LF347BD is identical to the original part in its fundamental architecture (JFET input, quad-channel, pin-compatible) and core dynamic performance (slew rate of 13V/µs, supply range of 7-36V). The deviations are as follows: its gain bandwidth product (GBW) is 3 MHz, lower than the original part's 4 MHz, which will slightly degrade the high-frequency response of circuits in high-gain configurations; its input offset voltage is 3 mV, superior to the original part's 5 mV, benefiting DC accuracy; meanwhile, its quiescent current (8mA) is slightly higher than the original part's (7.2mA). For applications where bandwidth requirements are not extremely stringent, but where improved DC accuracy or a preference for the TI supply chain exists, the LF347BD is a suitable alternative.
2. LF347D Substitution Conclusion
The LF347D is a highly compatible substitute for the LF347M, with its applicability dependent on the specific bandwidth requirements of the application. The two parts are identical in core parameters such as input bias current, input offset voltage (both 5 mV), slew rate, and supply range. The most significant technical difference lies in the gain bandwidth product: the LF347D is rated at 3 MHz, compared to 4 MHz for the original part. This directly limits the usable bandwidth of the circuit under high closed-loop gain. Furthermore, the LF347D exhibits a slightly higher quiescent current (8mA), but its output current capability (40 mA) is explicitly specified and may be superior to the unspecified rating of the original part. For applications operating at lower frequencies or with lower closed-loop gain, the LF347D can serve as a direct drop-in replacement without circuit modification due to its complete pin and basic characteristic compatibility.
Analysis ID: 7CC4-F3D1000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com