Original Part
Alternative Part
1. LTC2862MPS8-1PBF Substitution Conclusion
The LTC2862MPS8-1PBF serves as a suitable replacement for the ISL4485EIBZ-T. Both devices are 20 Mbps, half-duplex, single-transceiver ICs with pin-to-pin compatibility (8-SOIC package), allowing for a direct PCB swap. Key differences are as follows: First, the LTC2862 offers a wider supply voltage range (3V to 5.5V), whereas the ISL4485 is limited to 4.5V to 5.5V. This enables the LTC2862 to operate not only in the original 5V system but also in lower-voltage systems such as 3.3V, providing greater design flexibility. Second, the LTC2862 features a higher receiver input hysteresis (150 mV) compared to the ISL4485 (70 mV). This gives the LTC2862 superior noise immunity and more robust data reception in electrically noisy or distorted signal environments, thereby enhancing overall system reliability.
2. LTC2862MPS8-1TRPBF Substitution Conclusion
The LTC2862MPS8-1TRPBF is electrically and functionally identical to the PBF version described above and can fully replace the ISL4485EIBZ-T. The substitution feasibility conclusions are exactly the same as for the LTC2862MPS8-1PBF: pin-compatible, identical data rate, wider supply voltage adaptability (3V to 5.5V), and superior noise margin (150 mV hysteresis). The only distinction lies in the packaging format (TRPBF typically indicates tape-and-reel packaging). This difference affects only the feeder setup during SMT assembly and has no impact on circuit design or performance. Selection between the two should be based on production process requirements.
Analysis ID: AF8C-AA54000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com