Original Part
Alternative Part
1. PS2501A-1-A Substitution Conclusion
Direct substitution is not recommended. A significant discrepancy exists between the PS2501A-1-A and the original part (PS2501A-1-W-A) in the key parameter of Current Transfer Ratio (CTR). Its CTR range (50%-400%) is substantially wider than that of the original part (130%-260%). The PS2501A-1-A exhibits greater lot-to-lot variation and performance dispersion. In practical circuits, this could lead to insufficient drive capability (if CTR is too low) or excessive saturation depth with slower response times (if CTR is too high). Consequently, it may compromise signal transmission reliability and timing consistency, posing a risk of pushing the original design beyond its operating margins.
2. PS2501A-1-Q-A Substitution Conclusion
Substitution is acceptable for most applications, provided design margin is verified. The difference for the PS2501A-1-Q-A also lies in its CTR. Its range (100%-200%) is narrower than the original part's (130%-260%), with both a lower minimum and a lower maximum value. The narrower range indicates better part-to-part consistency. However, the overall lower CTR values mean its output current capability (i.e., gain) under the same input current is inferior to the original part. If the original design operates near the edge of the CTR gain range, substitution carries a risk of insufficient drive capability. If sufficient design margin exists, this part, due to its superior consistency, represents a qualified alternative.
Analysis ID: 6F0F-8B79000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com