Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

1. 2305A-1HDCGI Substitution Conclusion
This part is a viable direct substitute, with a note on level compatibility. The key difference lies in the input/output logic levels: the original part uses standard TTL levels, whereas the 2305A-1HDCGI features LVTTL (Low-Voltage TTL) inputs and outputs compatible with CMOS, LVCMOS, and TTL. Upon substitution, there may be subtle differences in the input threshold voltages (\(V_{IH}/V_{IL}\)) compared to the original design. Typically, LVTTL has a slightly lower minimum requirement for the high-level input voltage (\(V_{IH}\)) than TTL. Compatibility is generally good under a 3.3V supply. However, if the driving source is an older or marginal-performance TTL circuit, it is advisable to verify signal integrity. Additionally, its PLL supports a bypass mode (Yes with Bypass), providing extra flexibility for system debugging or low-power modes. This is an enhanced feature that does not affect its suitability as a basic functional replacement.
2. 2305A-1HDCGI8 Substitution Conclusion
This part is identical to the 2305A-1HDCGI in all provided electrical parameters and functionality. Therefore, its substitution feasibility is the same as the conclusion above—it is a viable direct substitute. The suffix "8" typically denotes differences in tape-and-reel packaging, lead-free/green compliance marking, or manufacturing lot codes, not electrical performance. The 2305A-1HDCGI8 shares the same core functionality, level specifications (LVTTL input, CMOS/LVCMOS/TTL output), and PLL bypass feature as the 2305A-1HDCGI, making them directly interchangeable. When substituting, the same attention should be paid to the compatibility of its LVTTL input levels with the original TTL signal system. Its PLL bypass capability can likewise be leveraged as a design advantage.
Analysis ID: 2256-CC7E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com


