Original Part
Alternative Part
1. TL072CDT Substitution Conclusion
Summary: The TL072CDT is not recommended as a direct replacement for the TL5580AIDR. While its exceptionally low input bias current (20 pA vs. 100 nA) and higher slew rate (16 V/µs vs. 5 V/µs) offer advantages in certain high-speed, high-impedance applications, its fundamental flaw lies in its excessively high input offset voltage (3 mV vs. 300 µV). This parameter is ten times worse than the original part, which will introduce unacceptable DC error and gain inaccuracy in applications demanding DC precision or small-signal amplification, such as sensor conditioning or precision amplification. Furthermore, its higher minimum operating voltage (6 V vs. 4 V) restricts its usability in low-voltage systems.
2. AD712KRZ Substitution Conclusion
Summary: The AD712KRZ can serve as a high-performance alternative, subject to validation of its supply and drive capabilities. It matches or exceeds the key precision parameters of the original part, notably maintaining the same low input offset voltage (300 µV) as the TL5580AIDR. It also provides an extremely low input bias current (25 pA) and a higher slew rate (20 V/µs), delivering superior performance in DC precision, speed, and high-impedance signal processing. Its primary limitations are a higher minimum operating voltage (9 V vs. 4 V) and weaker output current capability (25 mA vs. 50 mA). Consequently, it is unsuitable for single 5V or lower supply systems and may be inadequate for driving low-impedance loads.
Analysis ID: 1EBC-9C7E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com