Original Part
Alternative Part
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 8-DIP
Optoisolator Transistor with Base Output 5000Vrms 1 Channel 8-DIP
1. PS8501L1-V-AX Substitution Conclusion
The PS8501L1-V-AX can conditionally replace the HCPL-4562020. The differences are as follows:
1. Package dimensions: The PS8501L1-V-AX uses a wider 10.16 mm DIP package, while the original part is a 7.62 mm DIP. This prevents direct insertion into the existing PCB pads; either the board layout must be modified or an adapter solution employed.
2. Electrical parameters: Its typical forward voltage (Vf) is 1.7 V (original: 1.3 V), and the maximum forward current (If) is 25 mA (original: 12 mA). This requires the drive circuit to provide higher voltage headroom, but also allows greater input current and design margin. The maximum output voltage is 35 V (original: 20 V), providing higher output‑side voltage withstand capability.
Provided that key specifications such as isolation voltage and output current are matched, functional substitution is feasible if PCB space and drive voltage can accommodate the changes.
2. PS8501-V-AX Substitution Conclusion
The PS8501-V-AX is a more direct and practical replacement option. Its electrical parameters are identical to those of the PS8501L1-V-AX (Vf = 1.7 V, If(max) = 25 mA, Vout(max) = 35 V); similarly, the drive circuit must supply higher voltage headroom, while the output side offers greater voltage withstand margin. The key advantage is that its package matches the original part exactly—both are 7.62 mm wide 8‑pin DIPs—enabling a direct physical pin‑for‑pin replacement without any PCB layout modifications. Once the input drive circuit is verified to meet the higher Vf requirement, this part allows straightforward drop‑in substitution.
Analysis ID: E757-F4DF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com