Original Part
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
Alternative Part
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
100 MHz XO (Standard) LVDS Oscillator 2.5V Enable/Disable 6-SMD, No Lead
1. 633L10006C2T Substitution Conclusion
Based on a technical parameter comparison, the 633L10006C2T fully matches the original part XLL328100.000000X in key specifications such as frequency, output type, voltage, package dimensions, and frequency stability, making it functionally a direct replacement. The primary difference lies in current consumption: the 633L10006C2T has a maximum operating current of 66 mA, whereas the original part is rated at 34 mA, representing a power increase of approximately 94%. This deviation may lead to higher overall system power budget, requiring reassessment of power supply capacity and thermal management in battery‑powered or low‑power designs. Substitution is feasible if the application is not power‑sensitive and the power supply design has sufficient margin; however, for power‑critical applications, the replacement could introduce risks. It is recommended to test and validate the actual power impact before implementation.
2. 633V10006C2T Substitution Conclusion
The feasibility conclusion for the 633V10006C2T is essentially the same as for the 633L10006C2T, as both share identical parameters. It is fully compatible with the original part in frequency, output, voltage, package, and stability. The same difference applies: the maximum operating current increases from 34 mA to 66 mA, resulting in a significant rise in power consumption. When considering substitution, system power constraints must be evaluated: if the original design provides sufficient current margin and low‑power optimization is not a priority, the replacement can proceed smoothly. Conversely, in high‑density or portable devices, the increased power may affect battery life or thermal design. Therefore, it is advisable to perform actual power measurement and circuit evaluation prior to substitution.
Analysis ID: 93C7-C26A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com