Original Part
Alternative Part
100 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 150mOhm
100 Ohms @ 100 MHz 1 Ferrite Bead 0603 (1608 Metric) 400mA 200mOhm
1. BBGK00160808101Y00 Substitution Conclusion
From a technical parameter perspective, the BBGK00160808101Y00 matches the original part in package size (0603), impedance test frequency (100 MHz), and number of lines (1), providing direct physical and basic electrical compatibility. The main differences are its lower nominal impedance (100 Ω vs. 120 Ω), higher rated current (600 mA vs. 350 mA), and lower DC resistance (150 mΩ vs. 200 mΩ). At 100 MHz, this part offers slightly weaker attenuation of high-frequency noise compared to the original part. However, its higher current handling capability and lower DC loss can improve line current-carrying efficiency and thermal performance. If the application circuit is not sensitive to impedance accuracy and requires higher current margin or lower DC voltage drop, this part is a viable substitute. Note that the high-frequency filtering characteristics may be slightly altered.
2. FB03YTYN101 Substitution Conclusion
The FB03YTYN101 is also compatible with the original part in package, test frequency, and number of lines, allowing direct drop-in replacement. Its differences include lower nominal impedance (100 Ω vs. 120 Ω), slightly higher rated current (400 mA vs. 350 mA), and identical DC resistance (200 mΩ). This indicates that its high-frequency noise suppression performance is close to but marginally weaker than the original part, while its current-carrying capacity is slightly improved with no negative impact on DC power dissipation. If the application can tolerate the minor impedance deviation (approximately 17% lower) and the slightly higher current rating benefits design margin, this part can be considered as an alternative. However, verification of filtering effectiveness at the specific noise frequencies is recommended to ensure requirements are still met.
Analysis ID: A7E5-9297000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com