Alternative Part
1. 100DP3T1B1M2QEH Substitution Conclusion
From a core electrical and mechanical specification standpoint, the E-Switch 100DP3T1B1M2QEH demonstrates high compatibility with the original C&K 7203SYCQE. Both are DPDT switches with On-Off-On functionality, rated for 5A AC/DC, 120V AC/28V DC. They share PC pin terminals, identical panel cutout diameter (6.35mm), and thread specification (1/4-40). The actuator material and sealing methodology are also consistent. The primary deviation is a slightly shorter actuator length (0.26mm), which typically does not impact panel mounting or operation. This part can serve as a direct drop-in replacement for the original, requiring no modifications to circuit design or panel structure, with comparable electrical lifespan and performance.
2. MTA206P Substitution Conclusion
The TE Connectivity MTA206P is functionally equivalent to the original part but presents several key variances. Its current rating is AC 6A/DC 4A (versus AC/DC 5A for the original), necessitating verification that the load current remains below 4A in DC applications. The terminal type is solder lug instead of PC pin, requiring a change in PCB layout or wiring method. The panel cutout diameter is slightly larger (6.40mm vs. 6.35mm), which may affect mounting security. The actuator finish is nickel-plated rather than chrome-plated, resulting in a slight visual difference. Its electrical endurance is improved to 60,000 cycles. If the application is primarily AC with currents not exceeding 6A, and if solder terminals and minor panel fit adjustments are acceptable, this part can be substituted. However, derating is mandatory for DC operation.
Analysis ID: C084-274F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com