Original Part
80 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 400mA 150mOhm
Alternative Part
1. EMI0603R-68 Substitution Conclusion
Summary: Substitution is feasible under specific conditions, but the filtering performance requires careful evaluation. The EMI0603R-68 outperforms or matches the original part in three key parameters: package size, rated current (600mA > 400mA), and DC resistance (100mΩ < 150mΩ). It offers higher current-handling capability and lower power dissipation/self-heating. Its core filtering parameter—an impedance of 68Ω at 100MHz—is lower than the original's 80Ω. Consequently, its noise attenuation around the target frequency (100MHz) will be slightly weaker. If this minor reduction in attenuation margin is acceptable, or if the circuit design has sufficient headroom, the EMI0603R-68 represents an electrically superior substitute.
2. EMI0603R-80 Substitution Conclusion
Summary: Direct substitution is recommended; this is a preferred option for performance enhancement. The EMI0603R-80 matches the original part exactly in core filtering characteristics (80Ω @ 100MHz), package size, and rated current (400mA), ensuring unchanged filtering performance after replacement. Furthermore, its DC resistance (100mΩ) is significantly lower than the original's 150mΩ. Under the same operating current, this ferrite bead will exhibit a lower voltage drop and reduced power loss (self-heating), thereby improving circuit efficiency and reliability. This part is a risk-free, direct replacement option with positive benefits.
Analysis ID: 6684-4603000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com