Original Part
120 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 1.5A 70mOhm
Alternative Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 25mOhm
1. BBUP00160808101Y00 Substitution Conclusion
The BBUP00160808101Y00 is a viable substitute for the original part number HPZ1608D121-1R5TF in most applications, provided the impact of key parametric differences is considered. These differences are as follows: The impedance is reduced from 120Ω @ 100 MHz to 100Ω @ 100 MHz. This may slightly degrade high-frequency noise suppression and filtering performance, necessitating evaluation in circuits critically dependent on a specific impedance value. The current rating is increased from 1.5A to 3A, indicating the substitute can handle higher current loads, thereby improving reliability and thermal performance. The DC resistance (DCR) is lowered from 70mΩ to 30mΩ, which reduces voltage drop and power loss on the power line, benefiting overall system efficiency. Furthermore, the package footprint and height (0.037" / 0.95mm) remain identical to the original, ensuring mechanical compatibility. In summary, this substitute is recommended if the application has a wide impedance tolerance and would benefit from the higher current rating and lower DCR, though its high-frequency filtering performance may require re-verification.
2. BBUP00160805101Y00 Substitution Conclusion
The BBUP00160805101Y00 presents a highly feasible alternative to the original HPZ1608D121-1R5TF, though the combined effect of its parameter shifts should be reviewed. The key variances include: The impedance is similarly reduced from 120Ω to 100Ω @ 100 MHz, which may attenuate high-frequency noise suppression, requiring adjustment based on circuit filtering requirements. The current rating sees a significant increase from 1.5A to 3A, enhancing current-handling capability and system stability. The DC resistance is markedly lower, dropping from 70mΩ to 25mΩ, which further minimizes power dissipation and temperature rise. The profile height is reduced from 0.037" (0.95mm) to 0.026" (0.65mm), making the substitute thinner and advantageous for space-constrained applications; however, installation compatibility concerning PCB layout and mechanical stress should be confirmed. The package footprint remains consistent at 0603. Overall, this part offers advantages in current rating, DCR, and profile height over the original. Its suitability is highest for applications where noise suppression requirements are not stringent and where efficiency and a compact form factor are prioritized.
Analysis ID: 4E17-D22A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com