Original Part
120 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2A 55mOhm
Alternative Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2A 55mOhm
1. MH1608-101Y Substitution Conclusion
Substitution is generally feasible, but key differences must be considered: its rated current (3A) is higher than the original part (2A), which provides beneficial power margin, and its lower DCR (40mΩ) reduces voltage drop and thermal dissipation. However, its impedance (100Ω @100MHz) is slightly lower than the original (120Ω), which may lead to a minor reduction in high-frequency noise suppression. If the application does not require precise filtering around 100MHz and prioritizes current handling or efficiency, substitution is acceptable. In designs with stringent filtering requirements, high-frequency performance should be validated.
2. HPZ1608U101-2R0TF Substitution Conclusion
Direct substitution is highly viable, as this part belongs to the same series and manufacturer as the original, with identical package and mechanical dimensions. Current rating (2A) and DCR (55mΩ) also match, with only impedance reduced from 120Ω to 100Ω. This results in slightly lower attenuation at the same frequency, but if the circuit allows some tolerance in filter frequency response, replacement can proceed smoothly. This substitution is suitable for applications requiring identical mounting characteristics and current rating, while permitting minor adjustments in filtering performance.
Analysis ID: 4A20-2873000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com