Original Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2A 55mOhm
Alternative Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 25mOhm
1. BBUP00160808101Y00 Substitution Conclusion
This part can serve as a direct replacement for the original component. The key differences are an increase in rated current from 2A to 3A and a reduction in DC resistance from 55mOhm to 30mOhm. While maintaining the same package size (0603) and critical filtering characteristics (100Ω @ 100MHz), the substitute offers greater current-handling capability, lower power dissipation, and introduces less DC voltage drop in the power path. This represents a comprehensive upgrade in performance parameters. Implementing this substitution will result in improved current-carrying capacity and circuit efficiency.
2. BBUP00160805101Y00 Substitution Conclusion
This part is a viable electrical substitute for the original, but attention must be paid to the mechanical height difference. Beyond the increased rated current (to 3A) and lower DC resistance (25mOhm vs. original), the maximum profile height is significantly reduced from 0.95mm to 0.65mm. While the substitute provides higher current capability and lower conduction loss, its thinner profile may be advantageous for layout in applications with height constraints. However, if the original design has strict height requirements or relies on the component's height for mechanical support or heat sinking, this dimensional change must be evaluated. In the absence of such mechanical or thermal interference concerns, it is an electrically superior drop-in replacement.
Analysis ID: F105-ADDF000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com