Original Part
80 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
Alternative Part
70 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
80 Ohms @ 100 MHz 1 Signal Line Ferrite Bead 0603 (1608 Metric) 600mA 100mOhm
1. BBGK00160808700Y00 Substitution Conclusion
The feasibility of substituting this part is conditionally acceptable. The key deviation from the original part lies in its nominal impedance (70Ω @ 100MHz), which is lower than the original specification (80Ω @ 100MHz). This indicates a marginally weaker noise suppression capability at 100MHz. However, all other critical parameters—including package size (0603), rated current (600mA), and maximum DC resistance (100mΩ)—are identical to the original part. Therefore, if the attenuation requirement at this specific frequency is not critical, or if the impedance difference falls within the design's tolerance margin, this part can be considered a derated substitute. For applications requiring strict filtering performance matching, such as suppression at specific EMI frequencies, direct substitution is not recommended, and a re-evaluation of the filter's effectiveness is necessary.
2. BBGK00160808800Y00 Substitution Conclusion
The feasibility of substituting this part is highly viable, with verification recommended. Its primary technical parameters—including the critical impedance characteristic (80Ω @ 100MHz), rated current (600mA), DC resistance (100mΩ), and package size (0603)—are fully consistent with the nominal values of the original part, GZ1608U800CTF. There is virtually no difference in basic filtering performance, current-carrying capacity, or board space occupancy. From a parameter comparison standpoint, it is a direct equivalent substitute. However, prior to full-scale implementation, it is still advisable to conduct a small-batch, board-level verification. This ensures that its impedance-frequency curve, temperature rise, and other characteristics under actual operating frequency and current conditions align completely with the performance of the original part.
Analysis ID: 2933-56A0000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com