Original Part
Alternative Part
1. LM258P Substitution Conclusion
The LM258P is a viable drop-in replacement for the LM258DMR2G. Their core specifications are highly aligned, with identical supply voltage range (3-32V), output current (40mA), and fundamental architecture (general-purpose dual op-amp). The primary distinctions lie in the package and some secondary parameters. The LM258P utilizes a through-hole 8-DIP package instead of the surface-mount MSOP, requiring adjustments to PCB layout and assembly process. Furthermore, its quiescent current (500μA) is lower than that of the original part (800μA), resulting in reduced power dissipation—a favorable improvement. Minor differences in bandwidth (700kHz) and slew rate (0.3V/µs) are negligible for the vast majority of general-purpose, low-frequency applications. Provided the through-hole package is compatible with the assembly requirements, the LM258P serves as a functionally equivalent substitute with superior power efficiency.
2. RC4558DGKR Substitution Conclusion
The RC4558DGKR is not suitable as a direct replacement for the LM258DMR2G due to fundamental differences in key performance characteristics. While the RC4558DGKR offers superior specifications in some areas—such as higher bandwidth (3MHz), faster slew rate (1.7V/µs), and lower input offset voltage (500µV)—these advantages come at a significant cost. It exhibits a substantially higher quiescent current (2.5mA) and a narrower supply voltage range (10-30V). This supply range incompatibility prevents its operation at voltages as low as 3V, which the original design may utilize. Additionally, its output drive capability (10mA) is considerably lower than that of the LM258DMR2G (40mA), potentially causing insufficient drive for low-impedance loads. Although the RC4558DGKR outperforms in certain metrics, the incompatible supply voltage and output current characteristics present a direct barrier to substitution. It may only be considered in specific circuits where these parameters are non-critical and the supply voltage is appropriately matched.
Analysis ID: A4B1-CE1F000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com