Original Part
Alternative Part
1. LM2902KAVQPWR Substitution Conclusion
The LM2902KAVQPWR can serve as a direct replacement, but two key limitations must be considered: its maximum supply voltage is 30V (compared to 32V for the original part), which may pose a risk in applications operating near the upper limit; and its output current is 30mA (versus 40mA for the original), resulting in slightly weaker drive capability for heavy loads. Advantages include an input bias current as low as 20nA (original: 90nA), which benefits high-impedance signal conditioning, and automotive-grade AEC-Q100 qualification, making it suitable for harsh environments. If the system supply voltage is ≤30V and the load current requirement is ≤30mA, it can be substituted seamlessly; otherwise, reevaluation of supply and load compatibility is necessary.
2. LM2902KAVMPWREP Substitution Conclusion
The LM2902KAVMPWREP represents a more ideal substitute. Its supply range (3–32V) matches the original part exactly, while the output current is increased to 60mA (original: 40mA), providing significantly enhanced drive capability. Other parameters remain identical to the KAVQPWR, including 1.2 MHz bandwidth, 0.5 V/µs slew rate, and low 20nA input bias current, along with the same automotive-grade qualification. The only minor trade-off is a slightly higher input offset voltage (3mV vs. 2mV); for DC applications with extremely high precision requirements, error impact should be verified. Overall, this part offers superior compatibility, performance, and reliability compared to the original and can be used as a direct replacement.
Analysis ID: 1252-6FDA000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com