Original Part
Alternative Part
1. BA2904F-E2 Substitution Conclusion
The BA2904F-E2 is compatible with the LM358ADR2G in terms of supply voltage range (3–32 V) and basic functionality, but exhibits notable differences in key performance parameters: its gain–bandwidth product (500 kHz) is only half that of the original part (1 MHz), the slew rate (0.2 V/µs) is lower, and the output current capability (30 mA) is weaker. In applications requiring higher bandwidth, fast signal response, or stronger load-driving capability—such as high‑speed signal conditioning or driving capacitive loads—the BA2904F-E2 may lead to degraded performance. Furthermore, its package width (4.40 mm) must be verified for mechanical compatibility with the original device (3.90 mm). If the application involves only low‑frequency, low‑dynamic‑range signal processing (e.g., DC sensor amplification) and the package can be accommodated, the BA2904F-E2 may serve as a lower‑power‑consumption alternative (quiescent current 500 µA).
2. TL103WIDR Substitution Conclusion
The TL103WIDR is fully compatible with the LM358ADR2G in supply range, package dimensions, and output current (40 mA), while key parameters are either superior or comparable to the original part: the gain–bandwidth product (900 kHz) is slightly lower but the difference is marginal; input bias current (20 nA) and offset voltage (1 mV) are lower; and the slew rate (0.4 V/µs) is higher. In most general‑purpose amplifier circuits, the TL103WIDR can provide higher accuracy (particularly with high‑impedance signal sources) and faster transient response. Additionally, its supply current per channel (700 µA) is moderately lower, contributing to power savings. Overall, its electrical performance fully covers the requirements of the original device, making it an excellent substitute for higher‑performance applications. Attention should be given to the per‑channel supply current difference to ensure it does not adversely affect system power‑budget design.
Analysis ID: 9AB4-FB15000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com