Original Part
Alternative Part
1. RC4558DGKR Substitution Conclusion
The RC4558DGKR can serve as a substitute for the LM358DMR2G, but several key differences must be considered: it offers a higher gain-bandwidth product (3 MHz) and slew rate (1.7 V/µs), making it suitable for applications requiring wider bandwidth or faster response. However, its input bias current (150 nA) is significantly larger, which may increase DC error in high-impedance signal chains. Additionally, its supply voltage range (10–30 V) is narrower and incompatible with low-voltage systems (e.g., 3.3 V rails). Its quiescent current (2.5 mA per channel) is also substantially higher than the original part, requiring careful evaluation in power-sensitive designs.
2. LM258DGKR Substitution Conclusion
The LM258DGKR is a direct replacement for the LM358DMR2G, with closely matched parameters: both support a wide supply range (3–32 V), low quiescent current (500 µA per channel), and high output current (40 mA), making them suitable for low-power or battery-operated systems. The main differences are that the LM258DGKR has a slightly lower gain-bandwidth product (700 kHz) and slower slew rate (0.3 V/µs), which may limit performance in high-frequency or fast-transient applications. Its input bias current (20 nA) is lower, however, improving DC accuracy. For general low-frequency applications, it can be used as a drop-in replacement.
Analysis ID: C26F-884D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com