Original Part
Alternative Part
1. KA431LZTA Substitution Conclusion
The KA431LZTA is a highly feasible direct substitute for the TL431BILPRAG. All core parameters are identical, including reference voltage (2.495V), operating voltage range (up to 36V), output current (100mA), cathode current (1mA), typical temperature coefficient (50ppm/°C), and package (TO-92-3). The sole technical difference lies in initial accuracy (tolerance): ±0.4% for the TL431BILPRAG versus ±0.5% for the KA431LZTA. This 0.1% variance results in a slightly wider absolute voltage error range for the KA431LZTA at production. However, for the vast majority of applications—such as power supply feedback, voltage monitoring, and error amplification—this minor deviation typically falls within the system design margin and will not impact circuit functionality or performance. Therefore, the substitution is considered safe and may offer a cost advantage.
2. FAN431AZXA Substitution Conclusion
The FAN431AZXA can serve as a conditional substitute for the TL431BILPRAG. Its primary technical parameters and package are compatible with the original part. However, a key difference is its significantly relaxed initial accuracy of ±1%, compared to ±0.4% for the original. This means the actual reference voltage of the FAN431AZXA may deviate from its nominal value by up to 2.5 times the range of the original part. Substitution is acceptable in basic applications where reference voltage precision is not critical, such as simple voltage clamping or non-precision regulation. In applications with explicit requirements for overall system accuracy or consistency—such as precision power supplies, measurement circuit references, or circuits requiring strict threshold comparisons—this 1% error may be unacceptable. It can directly affect output accuracy or protection threshold points. Consequently, a thorough evaluation of the impact this accuracy degradation will have on end-product performance is mandatory before substitution.
Analysis ID: FB9B-0662000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com