(HKG) +86 755 8277 4696
WhatsAppWhatsApp
English
SkyChip
0
Original Part

PLL Clock Driver IC 200MHz 1 8-SOIC (0.154", 3.90mm Width)

Quote
Alternative Part

PLL Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

Quote

Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

Quote
1. 9112AM-16LF Substitution Conclusion Direct substitution is not recommended. While both devices are single-channel PLL clock drivers operating at 3.3V with a 1:5 output ratio and are package-compatible, there are critical differences. The 9112AM-16LF has a maximum operating frequency of 133MHz, which is lower than the original part's 200MHz. This may fail to meet timing requirements in high-frequency applications. Furthermore, its input/output type is generically labeled as "Clock" without specifying an electrical standard (e.g., LVTTL), introducing uncertainty regarding level compatibility with the original circuit. Substitution could be cautiously evaluated only if the system clock frequency is below 133MHz and the interface levels are confirmed to match. Otherwise, it risks performance degradation or signal integrity issues.
2. 2305-1HDCG8 Substitution Conclusion Conditional substitution; compatibility verification is required. This part is generally consistent with the original in terms of voltage, number of outputs, package, and PLL with bypass functionality. However, two primary differences exist. First, its maximum frequency is also 133MHz, limiting its use in high-frequency scenarios. Second, its outputs support multiple standards (CMOS/LVCMOS/TTL), offering broader compatibility compared to the original's LVTTL outputs. This necessitates confirmation that the output levels match the downstream loads. If the system frequency is ≤133MHz and the output levels are compatible (either by configuration or load adaptation), this part can be considered an alternative. Special attention must be paid to whether key timing parameters, such as clock jitter and setup/hold times, meet the system requirements.
Analysis ID: 1328-6B04000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com