Original Part
Alternative Part
Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

Zero Delay Buffer IC 133MHz 1 8-SOIC (0.154", 3.90mm Width)

1. 2305-1HDCGI8 Substitution Conclusion
The 2305-1HDCGI8 can be considered a potential substitute for the CDCVF2505DRG4 in terms of package compatibility, supply voltage, and core functionality (1:5 buffer with PLL bypass). The primary limitation is its significantly lower maximum operating frequency of 133 MHz compared to the original part's 200 MHz. This restricts its use to systems where the clock frequency does not exceed 133 MHz; otherwise, it will not function correctly. Another key difference is its output interface, which supports CMOS/LVCMOS/TTL standards versus the original part's LVTTL-only interface. Consequently, differences in output voltage levels, drive strength, and rise/fall times are expected. A thorough re-evaluation of timing and signal integrity compatibility with the downstream load circuitry is therefore mandatory.
2. 2305A-1DCG8 Substitution Conclusion
The substitution feasibility conclusion for the 2305A-1DCG8 is largely consistent with that of the 2305-1HDCGI8: it is fully compatible in package and power supply, but shares the same two key technical divergences—frequency and output interface. Its 133 MHz maximum frequency remains the primary barrier to a direct drop-in replacement, limiting its applicability to low-to-mid-speed clock domains. Its multi-standard output (CMOS/LVCMOS/TTL) offers greater potential load compatibility compared to the original part's single LVTTL output. However, it is critical to verify that its specific output voltage levels and edge rates meet the system's timing requirements in the target application. It cannot be treated as an electrically equivalent direct replacement. Typically, an "A" revision may indicate a product iteration or minor performance tuning, but based on the provided parameters, its key performance constraints are identical to those of the 2305-1HDCGI8.
Analysis ID: CF2A-2D47000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com


