Original Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
Alternative Part
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-TSSOP
Transceiver, Non-Inverting 2 Element 8 Bit per Element 3-State Output 48-SSOP
1. 74FCT16245CTPAG Substitution Conclusion
From the perspective of core functionality and electrical parameters, the 74FCT16245CTPAG is a directly viable substitute. The primary difference lies in its package, which is a narrower 48-TSSOP (width: 6.10mm) compared to the original 48-SSOP (width: 7.50mm). The pinout is fully compatible; however, the physical dimensions differ. Therefore, substitution requires a re-evaluation of the PCB's mounting space and pad layout, as a direct pad-to-pad replacement is not possible. Beyond this, all key performance specifications—including logic type, operating voltage range (4.5V-5.5V), and drive capability (32mA/64mA)—are identical. Once the package compatibility issue is resolved, the circuit functionality will be fully matched.
2. 74FCT163245CPVG Substitution Conclusion
The 74FCT163245CPVG is not suitable as a direct substitute. Two critical differences exist: First, its operating voltage range is 2.7V to 3.6V (typical for 3.3V systems), which is completely incompatible with the original 5V system (4.5V-5.5V). Second, its output drive current (8mA/24mA) is significantly lower than the original's (32mA/64mA). If used directly in a 5V system, the device risks overvoltage damage. Furthermore, its lower drive strength may fail to meet the original design's load requirements, potentially causing signal integrity or timing issues. Although the package is identical to the original (48-SSOP), the fundamental differences in voltage level and drive capability limit this part to 3.3V low-voltage designs and preclude its use as a substitute for the 5V original.
Analysis ID: BFDB-8B0B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com