Original Part
General Purpose Digital Isolator 2500Vrms 1 Channel 100Mbps 25kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
Alternative Part
General Purpose Digital Isolator 3750Vrms 1 Channel 150Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
General Purpose Digital Isolator 2500Vrms 1 Channel 1Mbps 35kV/µs CMTI 8-SOIC (0.154", 3.90mm Width)
1. SI8610EC-B-ISR Substitution Conclusion
The SI8610EC-B-ISR demonstrates high substitution feasibility against the original ISO721DRG4, as it meets or exceeds most key parameters. Key advantages include: higher isolation voltage (3750Vrms vs. 2500Vrms), providing stronger electrical isolation; higher data rate (150Mbps vs. 100Mbps) and lower propagation delay (13ns vs. 24ns), which improve signal transmission speed and system response time; and higher CMTI (35kV/µs vs. 25kV/µs), indicating superior noise immunity. Slightly higher pulse width distortion (4.5ns vs. 2ns) and longer rise/fall times (2.5ns vs. 1ns) may introduce minor signal distortion in very high-speed applications and should be evaluated against application tolerance. The wider supply voltage range (2.5V–5.5V vs. 3V–5.5V) enhances compatibility. Overall, this device is a suitable replacement for the original, particularly in applications requiring higher isolation, speed, or noise immunity, provided the pulse distortion is acceptable.
2. SI8610AB-B-ISR Substitution Conclusion
The SI8610AB-B-ISR has low substitution feasibility for the original ISO721DRG4 due to significant gaps in key performance parameters. Its data rate is substantially lower (1Mbps vs. 100Mbps), which cannot support high-speed data transfer and may severely limit application bandwidth. Higher propagation delay (35ns vs. 24ns) and significantly greater pulse width distortion (25ns vs. 2ns) will increase signal timing errors and distortion, affecting system response and accuracy. Although it offers the same isolation voltage (2500Vrms) and higher CMTI (35kV/µs vs. 25kV/µs), improving noise immunity, its low-speed characteristics restrict it to applications with minimal speed requirements. Unless the application does not require high-speed operation, this device is not a suitable replacement and may lead to electrical performance mismatch issues.
Analysis ID: ED6D-228B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com