Original Part
Alternative Part
1. BA2904F-E2 Substitution Conclusion
The BA2904F-E2 matches the original LM258ADRE4 in key parameters including supply voltage range (3V–32V) and input offset voltage (2mV), meeting the basic requirements for direct substitution. Differences are noted in its slew rate (0.2V/µs) and gain bandwidth product (500kHz), both lower than those of the original part (0.3V/µs, 700kHz). This makes the BA2904F-E2 less responsive in high‑speed or higher‑frequency applications. Its output current capability (30mA) is also lower, limiting performance when driving heavy loads. Additionally, the package width (4.40mm) is slightly larger than the original (3.90mm), which may cause mechanical fit issues in tightly constrained PCB layouts. If the application does not demand high bandwidth, fast slew rate, or strong output drive, and PCB space permits, the BA2904F-E2 can be considered a downgrade substitute; otherwise, it is not recommended.
2. LM358ADR2G Substitution Conclusion
The LM358ADR2G is fully compatible with the original LM258ADRE4 in supply range, output current, and package dimensions, and offers a significantly higher gain bandwidth product (1MHz), which improves small‑signal handling at higher frequencies. However, a key difference is its input bias current (45nA), which is substantially higher than the original’s 15nA. This can introduce larger output errors in DC‑precision‑sensitive applications such as high‑gain sensor amplification. Its quiescent current (800µA) is also notably higher, increasing power consumption and making it less suitable for battery‑powered systems. Furthermore, the slew rate is not specified in the datasheet; bench verification or additional documentation is needed to confirm whether transient response requirements are met. If the application is not sensitive to input bias current and power consumption, and higher bandwidth is desired, the LM358ADR2G can be considered an upgrade. Conversely, it is not recommended for designs emphasizing DC accuracy or low power operation.
Analysis ID: 3E40-C582000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com