Original Part
Alternative Part
1. LM358ADR2G Substitution Conclusion
The LM358ADR2G can generally serve as a replacement for the LM2904DE4, though key parameter differences must be evaluated for suitability. It offers a higher gain bandwidth (1 MHz vs. 700 kHz), which benefits high‑frequency small‑signal processing. However, its input bias current (45 nA vs. 20 nA) is significantly higher, potentially increasing error in high‑impedance sensor applications. Quiescent current (800 µA vs. 500 µA) rises by about 60%, noticeably impacting power consumption in battery‑powered systems. Additionally, the supply range extends to 32V (vs. 26V original), improving high‑voltage adaptability, while the package remains fully compatible. If the application is sensitive to input bias current and power draw—such as in precision acquisition or low‑power devices—caution is advised when substituting. For general signal conditioning or wide‑supply scenarios, the part can be used interchangeably.
2. BA2904SF‑E2 Substitution Conclusion
The BA2904SF‑E2 offers partial replacement capability for the LM2904DE4, but its performance limitations may affect dynamic response. Its lower gain bandwidth (500 kHz vs. 700 kHz) and slew rate (0.2 V/µs vs. 0.3 V/µs) restrict high‑frequency signal amplification speed and bandwidth. Output current (30 mA vs. 40 mA) is reduced by 25%, weakening drive capability for capacitive or low‑impedance loads. Advantages include better input offset voltage (2 mV vs. 3 mV), an extended supply range up to 32V, and input bias current and quiescent current matching the original part. Note that the mechanical footprint differs: the 8‑SOP package (width 4.40 mm) versus the original 8‑SOIC (3.90 mm), requiring verification of PCB layout compatibility. This substitute is suitable for medium‑ to low‑speed circuits with relaxed bandwidth and drive requirements; it is not recommended for high‑frequency or heavy‑load applications.
Analysis ID: 6FCB-243D000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com