Original Part
Alternative Part
1. LM358ADR2G Substitution Conclusion
The LM358ADR2G can generally substitute the LM2904DG4, but key performance differences must be considered: its higher gain-bandwidth product (1 MHz) benefits high-frequency small-signal applications, while its significantly larger input bias current (45 nA) may increase DC error in high-impedance circuits. Additionally, the higher quiescent current (800 µA) is less suitable for low-power designs. Pinout and package are fully compatible, and the wider supply voltage range (3–32 V) offers greater adaptability; however, the unspecified slew rate may affect dynamic response. Substitution is acceptable if input precision and power consumption are not critical in the application.
2. BA2904SF-E2 Substitution Conclusion
The BA2904SF-E2 has limitations in key parameters: its gain-bandwidth product (500 kHz) and slew rate (0.2 V/µs) are lower than those of the original part, potentially reducing bandwidth and transient response. The output current (30 mA) is also lower, resulting in slightly weaker drive capability. Although input bias current (20 nA) matches the original part and quiescent current (500 µA) is identical, the package width (4.40 mm) is slightly larger than the original (3.90 mm), requiring verification of PCB layout compatibility. The wider supply range (3–32 V) suits broad-voltage applications. Substitution may be considered with caution if dynamic performance is not critical and the package can be accommodated.
Analysis ID: 65F2-67D3000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com