Original Part
Alternative Part
1. BA2904SFV-E2 Substitution Conclusion
The BA2904SFV-E2 can serve as a direct replacement for the LM358PW in general-purpose amplification circuits where performance requirements are not stringent. Key parameters of the two devices are highly comparable: their supply voltage ranges overlap (3–30 V vs. 3–32 V), input bias currents are identical (20 nA), and quiescent currents match (500 µA). The main differences are that the BA2904 offers slightly lower bandwidth (500 kHz vs. 700 kHz) and slew rate (0.2 V/µs vs. 0.3 V/µs), which may result in somewhat weaker performance in high‑frequency signal or fast transient response applications. However, its lower input offset voltage (2 mV vs. 3 mV) can improve DC accuracy. If the application is tolerant of the reduced bandwidth and slew rate, and pin‑to‑pin compatibility is important (the 8‑SSOP and TSSOP packages share the same footprint), this part can be a drop‑in replacement.
2. BA4580RFVT-E2 Substitution Conclusion
The BA4580RFVT-E2 exhibits significant parametric differences from the LM358PW, requiring careful evaluation before substitution. Its advantages include higher bandwidth (5 MHz vs. 700 kHz) and higher slew rate (4 V/µs vs. 0.3 V/µs), making it suitable for high‑frequency or fast‑signal processing applications; its very low input offset voltage (500 µV) also improves precision. However, notable drawbacks exist: the quiescent current is as high as 6 mA (far exceeding the 500 µA of the LM358), leading to substantially increased power dissipation; the higher input bias current (100 nA vs. 20 nA) may affect accuracy in high‑impedance circuits; and the higher minimum supply voltage (4 V vs. 3 V) restricts use in low‑voltage applications. If the system can accommodate the higher power consumption and tighter voltage limits, and requires higher‑performance amplification, substitution is feasible; otherwise, a direct pin‑compatible replacement is not recommended.
Analysis ID: 9C2A-D78A000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com