Original Part
50 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Enable/Disable 6-SMD, No Lead
Alternative Part
50 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Enable/Disable 6-SMD, No Lead
50 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Enable/Disable 6-SMD, No Lead
1. 545CAA50M0000BCG Substitution Conclusion
From a core electrical and mechanical specification perspective, the 545CAA50M0000BCG can serve as a drop-in replacement for the original part. This is based on identical frequency, output type, voltage range, frequency stability, package footprint, and enable/disable functionality. However, a critical difference must be noted: both operating current and disabled current are significantly higher (operating current increased from 108mA to 127mA, disabled current from 100mA to 112mA). The new device exhibits higher power dissipation. Therefore, the power supply system's load capability and thermal design must be re-evaluated prior to substitution. If the system has sufficient power headroom and the resulting temperature rise remains within acceptable limits, the substitution is viable. Otherwise, risks of insufficient power delivery or overheating may arise.
2. 545CAA50M0000BCGR Substitution Conclusion
The 545CAA50M0000BCGR is identical to the BCG variant mentioned above in all technical parameters except for packaging. Consequently, the substitution conclusion remains the same: it is electrically and mechanically directly compatible, but carries the same issue of increased power dissipation. Compared to the original part, its operating and disabled currents are also 127mA and 112mA, respectively, representing an approximate 18% increase in power consumption. This is the primary risk factor during substitution. Furthermore, the suffix "R" typically denotes a difference in physical supply form, such as reel orientation, and does not affect board-level soldering or performance. In practical replacement scenarios, the focus should be on assessing the impact of the increased power dissipation on the system and confirming that the packaging format is compatible with the production line's placement requirements.
Analysis ID: 5E0E-C5BA000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com