Original Part
Alternative Part
1. NJM4580D Substitution Conclusion
The NJM4580D is not a direct substitute for the NE5532PE4. Although both are dual op-amps with pin-to-pin compatibility, the NJM4580D is an audio-specific amplifier. Its slew rate (5 V/µs) is notably lower than that of the NE5532 (9 V/µs), which may lead to distortion in general-purpose circuits requiring fast transient response, such as high-frequency or large-signal processing. Additionally, its higher gain-bandwidth product (15 MHz) helps achieve low distortion within the audio band, but in non-audio applications, the wider bandwidth may increase susceptibility to noise or oscillation. Furthermore, its lower supply voltage limit (4 V) may allow operation in designs originally intended for higher single-supply or narrow supply ranges, but the differing performance focus makes it unsuitable as a direct replacement for a standard general-purpose op-amp.
2. NJM5532DD Substitution Conclusion
The NJM5532DD can be considered a viable alternative to the NE5532PE4. Both are standard general-purpose dual op-amps with closely matched key parameters: gain-bandwidth product is 10 MHz for both, while slew rate (8 V/µs vs. 9 V/µs), input bias current (200 nA), offset voltage (500 µV), and output current capability (38 mA) are nearly identical. The main differences are that the NJM5532DD offers a wider supply voltage range (6–44 V), providing greater compatibility, and has a slightly higher quiescent current (9 mA vs. 8 mA), which should be considered in power-sensitive applications. Overall, its electrical characteristics are nearly equivalent to the original part, making it suitable for most general-purpose amplification, filtering, or signal conditioning circuits.
Analysis ID: DB5E-7C1E000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com