Original Part
Alternative Part
1. AD712KRZ-REEL Substitution Conclusion
Direct substitution is not recommended. While the AD712KRZ is compatible with the original part in terms of supply voltage range and package, there are critical differences in its core performance. Its input bias current (25 pA) is more than six times that of the OPA2107 (4 pA), and its input offset voltage (300 µV) is three times higher than the original part's (100 µV). The DC accuracy and performance of the AD712 in applications with high-impedance signal sources will be significantly inferior to the OPA2107, likely introducing greater DC error and temperature drift. Although its AC performance (bandwidth, slew rate) is comparable, as a general-purpose J-FET amplifier, it cannot meet the high-precision, low-error application requirements targeted by the original part. Substitution feasibility is low.
2. AD8620ARZ-REEL Substitution Conclusion
Provided voltage conditions are met, this is a high-performance potential substitute. The AD8620 matches or surpasses the original part in key precision parameters: its input bias current (3 pA) is lower, and its input offset voltage (85 µV) is comparable. Furthermore, its AC performance significantly exceeds that of the OPA2107, with a slew rate (60 V/µs) and gain bandwidth product (25 MHz) far higher, enabling faster signal response and a wider effective operating bandwidth. The primary limitation is its narrower supply voltage range (10 V to 26 V) compared to the OPA2107 (9 V to 36 V), particularly its 10 V lower maximum voltage. If the system operating voltage is within 26 V, the AD8620 is an excellent upgrade substitute offering superior precision and speed. It is not usable if the voltage exceeds 26 V.
Analysis ID: 97C2-279C000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com