Original Part
Alternative Part
1. AD8617ARZ-REEL Substitution Conclusion
The AD8617ARZ-REEL exhibits significant limitations when substituting for the OPA2364AIDG4 and is only suitable for precision DC or low-frequency signal processing applications with extremely low bandwidth and ultra-low power consumption. The key differences are as follows: its gain bandwidth product is only 400 kHz (vs. 7 MHz for the OPA2364), and its slew rate is 0.1 V/µs (vs. 5 V/µs for the OPA2364). These result in severely inadequate dynamic performance, rendering it incapable of handling mid-to-high frequency signals or fast transients. However, it offers lower input bias current (0.2 pA) and offset voltage (400 µV), which is beneficial for high-precision DC applications. Note that its maximum supply voltage is 5 V (vs. 5.5 V for the OPA2364), and its output current is slightly lower, which may impact drive capability. Substitution may be cautiously considered only if the application is strictly limited to static or low-frequency measurements and is highly power-sensitive (quiescent current is only 38 µA).
2. AD8602ARZ-REEL Substitution Conclusion
The AD8602ARZ-REEL can be regarded as a direct or upgraded replacement for the OPA2364AIDG4 in most performance metrics, particularly in applications requiring higher precision and speed. Its gain bandwidth product (8.4 MHz) and slew rate (6 V/µs) are slightly better than those of the original part, while its input bias current (0.2 pA) and offset voltage (80 µV) are significantly improved, contributing to higher signal chain accuracy. However, its output current (50 mA) is lower, resulting in slightly weaker drive capability for heavy loads. Special attention must be paid to its minimum operating voltage of 2.7 V (vs. 1.8 V for the OPA2364); it will not be compatible if the system supply voltage falls below this level. For applications with a supply voltage ≥2.7 V and without stringent requirements for maximum output current, the AD8602 can offer superior overall performance.
Analysis ID: 92F9-FAF6000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com