Original Part
Alternative Part
1. AD8058ARZ Substitution Conclusion
The AD8058ARZ cannot directly replace the OPA2614IDR, primarily due to a critical difference in output configuration: the OPA2614 features a differential output, making it suitable for differential signal processing or noise‑immune applications, whereas the AD8058ARZ output type is unspecified (typically single‑ended), rendering substitution infeasible in applications requiring differential drive. Other technical distinctions include: the AD8058ARZ offers significantly higher slew rate (1150 V/µs) and bandwidth (325 MHz) than the OPA2614 (145 V/µs and 180 MHz), making it better suited for high‑speed signal processing; however, its higher input offset voltage (1 mV vs. 200 µV) degrades DC accuracy and impacts precision applications. The wider supply‑voltage range (3‑12 V vs. 5‑12 V) allows lower‑voltage operation, but the unspecified output drive capability (compared to 350 mA/channel for the OPA2614) may limit performance in high‑current load scenarios. Feasibility of substitution depends on whether the application can tolerate a single‑ended output and reduced DC precision while benefiting from the higher speed and lower‑voltage capability.
2. AD8058ARZ‑REEL7 Substitution Conclusion
The AD8058ARZ‑REEL7 is electrically identical to the AD8058ARZ, differing only in packaging (Reel7 tape‑and‑reel) for automated assembly; this does not affect electrical performance. The substitution conclusion remains the same as for the AD8058ARZ: direct replacement of the OPA2614IDR in differential‑output applications is not viable. However, substitution may be possible in single‑ended, high‑speed, low‑voltage systems, provided the differences in output type, input offset voltage (1 mV vs. 200 µV), and output drive capability are carefully evaluated. The higher slew rate (1150 V/µs) and bandwidth (325 MHz) benefit high‑frequency response, while the wider supply range (3‑12 V) supports flexible power‑supply design.
Analysis ID: 9A84-C282000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com