Original Part
Alternative Part
1. AD8613AUJZ-R2 Substitution Conclusion
The AD8613AUJZ-R2 is not a suitable direct replacement for the OPA364AIDBVTG4 due to orders-of-magnitude differences in key dynamic performance specifications. The AD8613's gain bandwidth product (400 kHz) and slew rate (0.1 V/µs) are significantly lower than those of the OPA364 (7 MHz, 5 V/µs). Consequently, the AD8613 would introduce severe bandwidth limitations and waveform distortion when handling high-frequency or fast-changing signals, failing to meet the original design's speed requirements. However, for applications prioritizing ultra-low power consumption and precision amplification of low-frequency DC or slowly varying signals (e.g., sensor interfaces), the AD8613 could be considered as a candidate for a redesigned solution optimized for power and accuracy. This is based on its extremely low quiescent current (38 µA vs. 1.1 mA) and superior input offset voltage (400 µV vs. 1 mV). Note that its maximum supply voltage (5 V) is slightly lower than that of the OPA364 (5.5 V).
2. AD8613AUJZ-REEL7 Substitution Conclusion
The substitution conclusion for the AD8613AUJZ-REEL7 is identical to that for the AD8613AUJZ-R2. The only distinction between these two parts is the reel packaging specification (-REEL7) versus the reel packaging with a specific quantity (-R2); their electrical parameters, silicon performance, and package are identical. Therefore, it also cannot directly replace the OPA364AIDBVTG4. The primary reason remains the substantial insufficiency of its gain bandwidth product (400 kHz) and slew rate (0.1 V/µs) compared to the original part (7 MHz, 5 V/µs), rendering it inadequate for circuits requiring bandwidth and speed. Nonetheless, it presents an attractive alternative for low-frequency applications demanding extremely low power consumption (38 µA) and high DC precision (400 µV offset). When considering its use, a thorough re-evaluation of circuit performance is necessary, and the supply voltage range (1.8 V to 5 V) must be confirmed as adequate.
Analysis ID: E6E1-C032000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com