Original Part
Alternative Part
1. AD8613AKSZ-REEL Substitution Conclusion
The device can serve as a substitute in specific low-bandwidth, low-power applications, but it is not a fully equivalent replacement due to performance mismatches. Compared to the OPA364IDBVRG4, the AD8613AKSZ-REEL exhibits significantly lower bandwidth (400 kHz vs. 7 MHz) and slew rate (0.1V/µs vs. 5V/µs). It is incapable of processing mid-to-high frequency or fast-changing signals and is suitable only for DC or very low-frequency applications. Its primary advantage lies in its ultra-low quiescent current (38µA vs. 1.1mA), making it appropriate for battery-powered portable devices. Additionally, its output current (80 mA vs. 85 mA) and maximum operating voltage (5V vs. 5.5V) are slightly lower, requiring attention when driving heavy loads or operating at elevated voltages. The pin package (SC-70-5) is compatible with SOT-23-5, but PCB layout compatibility should be verified.
2. AD8613AKSZ-REEL7 Substitution Conclusion
The substitution conclusion for the AD8613AKSZ-REEL7 is identical to that of the AD8613AKSZ-REEL. All key electrical parameters and packaging of the AD8613AKSZ-REEL7 are exactly the same as those of the AD8613AKSZ-REEL. The suffix “-REEL7” typically indicates reel packaging specifications (e.g., 7-inch reel, specific quantity) and denotes a different packaging option of the same part number, not a performance variant. Therefore, its feasibility as a substitute for the original part, along with the technical differences and limitations, aligns completely with the conclusion above: it is only suitable for applications with extremely low speed and bandwidth requirements but high sensitivity to power consumption, and it cannot fulfill the general mid-to-high frequency amplification tasks covered by the original part’s design.
Analysis ID: 9849-DDC7000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com