Original Part
Alternative Part
1. AD8610ARZ Substitution Conclusion
The AD8610ARZ can serve as a conditional substitute for the OPA602AU. Its primary technical advantages lie in superior precision (input offset voltage of 85µV vs. 1mV) and enhanced dynamic performance (slew rate of 60V/µs, bandwidth of 25MHz vs. 35V/µs, 6.5MHz). In applications requiring high-precision DC amplification or high-speed signal processing, the AD8610ARZ offers significantly better performance. Its output current capability (45mA vs. 20mA) is also higher, enabling it to drive heavier loads. A critical substitution constraint is its narrower supply voltage range (10V to 26V) compared to the original part (10V to 36V). Direct replacement is not feasible if the original circuit operates above 26V. Furthermore, its input stage is JFET-based (versus the standard amplifier input of the original part). While its input bias current (3pA) is of the same order of magnitude, it is slightly higher, requiring consideration in ultra-low input current applications.
2. AD8610BRZ-REEL Substitution Conclusion
The AD8610BRZ-REEL can be considered a more favorable conditional substitute than the AD8610ARZ. The overall conclusion aligns with that for the AD8610ARZ, but its core advantage is a higher precision grade. Its typical input offset voltage is as low as 45µV (superior to the ARZ's 85µV). In circuits demanding extremely high DC precision, low-error amplification, or precision measurement, the B-grade version delivers better performance. It shares the same performance benefits (high speed, high output current) and the same key limitation—the narrower supply voltage range (max 26V)—as the ARZ. Provided the system supply voltage is confirmed not to exceed 26V, the AD8610BRZ-REEL not only offers a pin-compatible replacement but also provides comprehensive improvements in both precision and dynamic performance, making it particularly suitable for upgrade applications sensitive to offset voltage.
Analysis ID: 2AB6-3D64000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com