Original Part
Alternative Part
1. ICL3243ECAZ Substitution Conclusion
The ICL3243ECAZ presents significant limitations when substituting for the SN65C3243PW. Key differences include a reduced data rate (from 1 Mbps down to 250 kbps) and a different package (from 28-TSSOP to 28-SSOP, with width increasing from 4.40 mm to 5.30 mm). The lower data rate renders this device unsuitable for high-speed RS-232 applications requiring 1 Mbps operation, restricting its use to low- or moderate-speed data transfer environments. The package difference introduces PCB layout incompatibility, necessitating a board redesign to accommodate the wider SSOP footprint, which increases hardware modification cost and complexity. The ICL3243ECAZ can only be considered as a substitute if the application data rate does not exceed 250 kbps and the package change is acceptable; otherwise, direct replacement is not recommended.
2. ICL3243ECVZ Substitution Conclusion
The ICL3243ECVZ offers partial feasibility as a replacement for the SN65C3243PW. The primary deviation is a reduced data rate (from 1 Mbps to 250 kbps), while the package remains identical (both are 28-TSSOP, 4.40 mm wide). The lower data rate prevents this device from meeting the high-speed performance of the original part, limiting its suitability to low-speed communication applications (e.g., 250 kbps and below). Package compatibility allows for drop-in replacement without PCB layout modifications, significantly reducing hardware adaptation effort. If the target application operates at or below 250 kbps and does not require high-speed communication, the ICL3243ECVZ can serve as a viable alternative to the SN65C3243PW, provided system-level verification confirms the speed reduction does not impact overall performance.
Analysis ID: F2A7-D7FC000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com