Original Part
Alternative Part
1. ICL3243ECVZ-T Substitution Conclusion
The ICL3243ECVZ-T is fully compatible in terms of package, logic levels, and supply voltage. However, its maximum data rate of 250 kbps is significantly lower than the original part's 1 Mbps, limiting its suitability to applications with low communication speed requirements. This device matches the original SN65C3243PW in all key parameters: core functionality (3-driver/5-receiver full-duplex RS-232), operating voltage range (3V to 5.5V), package (28-TSSOP), and receiver hysteresis (500mV). It is a drop-in replacement for the original PCB footprint and meets basic interface electrical requirements. With a data rate only one-fourth of the original, this part could become a system bottleneck or even cause communication errors in applications requiring high-speed data transfer, such as rapid file transfers or high-baud-rate modems. Therefore, it can only be recommended as a substitute for low-speed applications.
2. ICL3245CAZ Substitution Conclusion
The ICL3245CAZ is an exact match in electrical performance and communication speed. However, due to a different package size, it is not a direct pin-to-pin replacement, necessitating a re-evaluation of PCB layout and installation space. This device is highly consistent with the original part in all critical performance parameters, including data rate (1 Mbps), number of drivers/receivers (3/5), operating voltage range (3V to 5.5V), and receiver hysteresis (500mV). It fully meets the original design requirements for signal integrity and communication bandwidth. Its package is a 28-SSOP with a body width of 5.30mm, compared to the original 28-TSSOP with a width of 4.40mm. While the lead pitch (e.g., 0.65mm) is typically the same, the wider device body may not fit into the installation space reserved in the original design. Modifying the PCB footprint and layout is mandatory. Consequently, the feasibility of this substitution depends heavily on the available board space margin and the cost of redesign.
Analysis ID: 9A33-836B000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com