Original Part
120 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
Alternative Part
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 25mOhm
100 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 3A 30mOhm
1. BBUP00160805101Y00 Substitution Conclusion
The BBUP00160805101Y00 can be substituted for the WLBD1608HCU121TL under certain conditions, though careful evaluation of the technical differences is required. The primary difference is the impedance reduction from 120 Ohms @ 100 MHz to 100 Ohms @ 100 MHz, which may decrease high-frequency noise suppression by approximately 16.7%. This could impact performance in designs with stringent filtering accuracy requirements. The DC resistance is reduced from 30 mOhm to 25 mOhm, which is beneficial for lowering DC power loss, though the difference is minor and its practical impact is limited. The maximum height is reduced from 0.037 inches to 0.026 inches, which is advantageous for space-constrained, low-profile designs, but mechanical mounting compatibility must be verified. In summary, substitution is viable if the application allows for looser impedance tolerance and prioritizes low power consumption and a thin profile; otherwise, testing is recommended to validate filtering performance.
2. HFZ 1608PF-101T30 Substitution Conclusion
The HFZ 1608PF-101T30 presents a high feasibility for substituting the WLBD1608HCU121TL. Apart from the impedance reduction from 120 Ohms @ 100 MHz to 100 Ohms @ 100 MHz, all other key parameters—including rated current (3A), DC resistance (30 mOhm), package size (0603), and height (0.037 inches)—are fully matched, ensuring good mechanical and electrical compatibility. The lower impedance results in slightly weaker filtering attenuation at the 100 MHz point, which may have a minor impact on high-frequency noise suppression. However, if the circuit allows for a certain impedance tolerance (e.g., within ±20%) or operates over a broad noise frequency range, the substitution is generally acceptable. It is advisable to validate the filtering performance in the actual circuit to ensure no critical performance degradation.
Analysis ID: 4326-C968000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com