Original Part
68 Ohms @ 100 MHz 1 Power Line Ferrite Bead 0603 (1608 Metric) 2.5A 50mOhm
Alternative Part
1. BBPY00160808800Y00 Substitution Conclusion
This part can serve as a direct substitute; however, attention must be paid to the difference in its core filtering characteristic. The impedance has increased from 68 ohms to 80 ohms (both @100MHz). Consequently, around the same target frequency of 100MHz, this ferrite bead will provide stronger attenuation and higher inductive reactance. This may result in more effective high-frequency noise suppression, but it could also lead to more pronounced signal attenuation or an undesirable voltage drop, particularly in high-speed or high-current transient scenarios. All other key parameters—rated current (2.5A), package size (0603), and maximum DC resistance (50mOhm)—are identical to the original part. Furthermore, it is sourced from the same manufacturer, ensuring identical performance in mechanical fit, current handling capability, and DC loss. Therefore, substitution feasibility is high.
2. Z0603C600APMST Substitution Conclusion
This part represents a close electrical substitute, but involves a trade-off in parameters that requires evaluation. There are two key differences: first, the impedance is reduced to 60 ohms (@100MHz), resulting in slightly lower high-frequency impedance and attenuation capability at the target frequency compared to the original part. Second, the maximum DC resistance (DCR) is reduced to 40mOhm, which is a positive improvement. Under the same operating current, this will yield a lower DC voltage drop and reduced thermal loss across the bead itself, benefiting power efficiency and lowering temperature rise. Both the package size and rated current (2.5A) remain identical. If the application circuit does not have extremely stringent noise suppression requirements around 100MHz and places higher priority on lower DC loss, this part is an excellent alternative. Conversely, if the original design critically depends on the specific 68-ohm impedance for filtering, a more cautious evaluation is warranted.
Analysis ID: 6D84-05BB000
Based on part parameters and for reference only. Not to be used for procurement or production.
SkyChip © 2026, Email: sales@skychip.com